Lenovo ideapad 320 как разобрать

Разборка и чистка ноутбука Lenovo Ideapad 320

Это говнище не стоит вобще никаких денег,(брал чисто фильмы в дороге посмотреть).

HP Compaq 530

У ноутбуков с номерами KD092AA, KE666AA, KP477AA, KP479AA процессоры Intel Core.

Acer Extensa 5620

У меня полетела матрица, какие видеовыходы можно использовать?

ATI Mobility Radeon HD 5470

Ноут sony vaio VPCEC1M1R . Видеокарта ATI MOBILITY RADEON HD 5470. После установ.

HP ProBook 455 G8 – классика на службе у бизнеса

Dell XPS 9510 — стремиться к идеальности

Lenovo P11 Pro – оправданная цена

ASUS ROG Zephyrus S17 GX703 — дельная игровая машина

Honor MagicBook 16 – к сотрудничеству готов

Полное или частичное использование материалов сайта возможно только после согласия автора или администрации сайта.

Lenovo Ideapad 320 disassembly

Lenovo Ideapad 320 15 disassembly.

Today I explain how to disassemble a Lenovo Ideapad 320 laptop. In this particular guide I’m taking apart an Ideapad 320-15IAP (type 80XR) – the low end model but it will be very similar for all the following 15″ and 14″ models:

Ideapad 320-15IAP/Ideapad 320-15AST/
Ideapad 320-15ABR/Ideapad 320-15ABR Touch
Ideapad 320-15IKB (with cooling fan)
Ideapad 320-14IAP/Ideapad 320-14AST/
I will link to the service manual pdf at the end of this guide.

This laptop has limited options for RAM upgrade as it has only one memory slot. It will support either 8GB or 16GB depending on the model. The best option to speed up the laptop would be upgrading the standard 2.5″ hard drive with a 2.5″ solid state drive.

For this disassembly you will need only basic tools such as a Phillips screwdriver and case opener tool (or something similar).

Taking apart Lenovo Ideapad 320 base assembly

STEP 1.
Remove one screw securing the optical drive and pull the drive out.

Remove one screw securing the optical drive and pull the drive out.

STEP 2.
Remove all screws securing the base cover.

Remove all screws securing the base cover.

STEP 3.
Start separating the top case from the base cover using a thin case opener tool. Move the case opener along the side and pry up the top case. Ideapad 320-15IAP doesn’t even have the cooling fan.

Start separating the top case from the base cover using a thin case opener tool.

STEP 4.
Turn the laptop upside down and continue removing the base cover with your fingers. You’ll have to apply some reasonable force to separate two parts from each other. If it’s getting suck, use the case opener.
Lift up the base cover from the optical drive bay area.

Turn the laptop upside down and continue removing the base cover with your fingers.

When the base cover removed, you can get an easy access to the battery, hard drive, memory module and other internal components. Ideapad 320-15IAP doesn’t even have the cooling fan.

STEP 5.
Remove four screws securing the battery.

Remove four screws securing the battery.

STEP 6.
Lift up the battery and disconnect the cable from the motherboard.

Lenovo ideapad 320 battery model: L16C2PB2

Lift up the battery and disconnect the cable from the motherboard.

STEP 7.
Lift up the hard drive and disconnect it from the SATA connector. If you are upgrading to a SSD, it’s necessary to transfer the mounting bracket to the new drive.

Replacing this regular spinning drive with a 2.5″ solid state drive will improve laptop performance significantly.

Lift up the hard drive and disconnect it from the SATA connector.

STEP 8.
The memory module hidden under the metal cover. Lift up the memory cover to disconnect it from the securing clamps on the motherboard.

This laptop will can handle up to 16GB (2x8GB) DDR3-2600 SODIMM RAM.

Lift up the memory cover to disconnect it from the securing clamps on the motherboard.

STEP 9.
Disconnect both antenna cables from the wireless card.

Disconnect both antenna cables from the wireless card.

STEP 10.
Remove one screw securing the wireless card and pull it out.

Remove one screw securing the wireless card and pull it out.

STEP 11.
Un-route both Wi-Fi antenna cables from the guided path on the side of the heatsink bracket. Disconnect the display cable from the motherboard.

Un-route both Wi-Fi antenna cables from the guided path on the side of the heatsink bracket. Disconnect the display cable.

Here’s how to disconnect the display cable. Lift up the locking tab at a 90 degree angle (red arrow). Lift up and pull the display cable out (yellow arrow).

Here

STEP 12.
Open the display panel 180 degrees. Remove four screws securing the display panel hinges.

Open the display panel 180 degrees. Remove four screws securing the display panel hinges.

STEP 13.
Separate the display panel from the top case assembly.
In the next guide I will explain how to remove and replace the LCD screen. It’s necessary to remove the display panel in order to remove the screen.

Separate the display panel from the top case assembly.

STEP 14.
Remove four screws securing the motherboard. One screw on the heatsink is larger than three other screws.

Disconnect the following color-coded cables:
– Keyboard cable (yellow).
– Optical drive connector board cable (orange).
– SATA connector cable (green).
– Touchpad cable (glue).
– Speaker cable (pink).

Remove four screws securing the motherboard assembly and disconnect all shown cables.

In order to disconnect the keyboard cable it is necessary to unlock the connector first.

All other cables can be disconnected using the same technique.

STEP 15.
Lift up the motherboard and separate it from the top case.

Lift up the motherboard and separate it from the top case.

I left the RTC battery connected to the motherboard in order to preserve the BIOS settings.

By the way, disconnecting the RTC battery from the motherboard will not clear the BIOS password. I tried that and it didn’t work for me.

I left the RTC battery connected to the motherboard in order to preserve BIOS settings.

Here’s the other side of the motherboard.

Here

The DC power jack is soldered to the motherboard.

Here’s the top case with the motherboard removed.
Lenovo Ideapad 320 keyboard is permanently attached to the top case and cannot be easily removed even though it’s still possible to replace just the keyboard. The touchpad, on the other hand, is removable.

Lenovo 320-15

If you are making the laptop disassembly for the first time in your life, pay attention to this tutorial — First time repairing.

The article listed the basic precautions necessary tools to disassemble the laptop, as well as recommendations for disassembly and cleaning.

Lenovo 320-15 Series consists of models Lenovo 320E, 320-15ISK, 320-15IAP – All these models have the same disassembly process.

This video shows Lenovo 320-15 disassembling and fan cleaning.

If your laptop is overheating during operation and sharply turning off, this most likely is overheating of the cooling system. The reason for this is the accumulation of dust on the radiator. If not clean the cooling system in a timely manner, it may cause damage to the laptop. You can eliminate this problem by repeating the procedures shown in the video below.

This video shows how you can replace your HDD with another one or SSD in Lenovo 320-15.

All necessary steps presented here in this video guide. From this video you will learn how to replace slow HDD to a fast SSD. Replace the broken HDD to the new one.

This video shows Lenovo 320-15 RAM replacement or upgrading process.

All necessary steps presented here in this video guide. From this video you will learn how to replace the RAM or upgrade to make more memory.

This video shows Lenovo 320-15 battery replacement.

All necessary steps presented here in this video guide. From this video you will learn how to replace the battery in your laptop.

This video shows Lenovo 320-15 CMOS / Bios Reset / Bios battery replacement

If your laptop constantly reset the date and time, you need to change the BIOS battery. This video guide will demonstrate how to do this. When removing the Bios battery is automatically Bios Reset – in many cases, it helps to solve the problem of BIOS errors. If you remove Bios battery for more than 15 minutes, it may help if the laptop does not run, and the problem was in CMOS.

This video shows Lenovo 320-15 wifi module replacement.

All necessary steps presented here in this video guide. From this video you will learn how to replace wlan module in your laptop.

Disclaimer:

This information is provided for informational purposes only. We accept no liability for damage caused to your device while following the video instructions. Also note that if your laptop or any other device is still under warranty period, then in the process of dismantling the guarantee may be canceled because traces remain after disassembly and it violates the terms of the warranty period. Before disassembling, make sure that the warranty on your laptop has been over.

Скачать с ютуб Lenovo IdeaPad 320-17IKB как разобрать Замена HDD, памяти и чистка СО в хорошем качестве

Lenovo IdeaPad 320-17IKB как разобрать Замена HDD, памяти и чистка СО скачать рингтон MP3 для прослушивания или на звонок:

Если кнопки скачивания не загрузились НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием, пожалуйста напишите в поддержку по адресу внизу страницы. Спасибо за использование сервиса скачатьвидеосютуба.рф

Lenovo IdeaPad 320-17IKB как разобрать Замена HDD, памяти и чистка СО

Из видеоролика вы узнаете как самостоятельно разобрать и почистить систему охлаждения ноутбука Lenovo IdeaPad 320-17IKB а так-же заменит жесткий диск и оперативную память